Nat Gas Hook-Up - OCI OCIE26BQ Use And Care Manual

CONNECTION: 1/2" NPT male with 3/8" flare adapter and SS corrugated gas line.
OPERATING PRESSURE: 4.0" W.C.
SUPPLY PRESSURE: 5" TO 4" W.C. if in excess of 4" W.C. a step down regulator is required.
Check with your local gas utility company or with local codes for instructions on installing gas supply
lines. Be sure to check on type and size of run, and how deep to bury the line. If the gas line is too small the
Grill unit will not function properly.
To hook-up the fittings supplied with the Elite Grill unit: Assemble as shown in figure to the right. Use
joint compound on male threads only.
Do not use joint compound on the flare end of the 1/2" NPT to 3/8" flare adapter. Ensure that the regu-
lator arrow points in the direction of gas flow-towards the unit, away from the supply.
Do not forget to place a installer-supplied gas valve in an accessable location.
NATURAL GAS HOOK UP
8