By Using Cleaning Solution - Thane Fitness KB-6622V User Manual

24. Use only as directed in this manual. Use only manufacturer's
recommended accessories.
25. Use of attachments not provided or sold by the manufacturer or authorized
resellers may cause fire, electric shock or injury.
26. The liquid or steam should not be directed towards equipment containing
electrical components, such as the interior of ovens.
27. Do not expose to rain.
28. Stop using the H2O MOP X5™ if you observe water leakage, and contact a
qualified technician.
29. Do not use the H2O MOP X5™ in enclosed spaces that are filled
with flammable, explosive or toxic vapor such as paint thinner or oil-based
paint.
30. Do not use on leather, wax polished furniture or floors, unsealed hardwood
or parquet floors, synthetic fabrics, velvet or other delicate
steam-sensitive materials.
31. Do not use for space heating purposes.
32. Unplug appliance from outlet before servicing.
33. Do not touch hot surfaces.
34. Do not place on or near a hot gas or electric burner, or in a heated oven.
35. To disconnect the unit, turn the Power Switch ( O / I ) to the "OFF" position,
then remove plug from wall outlet.
36. Do not use appliance for other than its intended use.
37. Care should be taken when using appliance due to emission of steam.
38. To avoid circuit overload, do not operate another appliance on the same
socket (circuit) as the steam cleaner.
!
WARNING
DANGER OF SCALDING
HOUSEHOLD USE ONLY
Commercial use of this unit voids the manufacturer's warranty.
SAVE THESE INSTRUCTIONS
USER'S GUIDE
5
2) Use the Cleaning Pin to remove scale deposits from the small hole of the steam
outlet in the Main Body, as illustrated in Fig. 2.
By swirling and pushing the pin up and down
you will clean the steam outlet. Always ensure
that all scale debris have been removed from
the steam outlet before reassembling.
Continue swirling Cleaning Pin until no further
debris is evident.
By using cleaning solution
1) Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2) Secure and position the unit to ensure steam released is aimed away from the
floor or surrounding objects and surfaces. Plug the unit in, turn the unit ON by
pressing the Power Switch ( O / I ) and allow the unit to produce steam until the
vinegar/water solution is used up.
3) Repeat the above procedure as many times as necessary until a normal steam
flow rate is achieved.
4) Fill the Water Tank with fresh water and rinse out.
5) Fill the Water Tank with fresh water, attach to the unit and release steam
through the system until the Water Tank is empty.
!
WARNING
Do not leave the steamer unattended during the lime scale removal
process and/or while in use.
!
NOTICE
Perform a test cleaning on a suitable isolated area after each lime scale removal to
ensure that there is no debris left in the system.
!
DANGER OF SCALDING
WARNING
USER'S GUIDE
2
30