Return The Extender To Its Factory Settings; Use The Factory Reset Button To Restore Factory Settings - NETGEAR WN3000RP User Manual

3. Type admin for the user name and password for the password.
If you already changed the password, type your personalized password.
4. Select Maintenance > Backup Settings.
5. Click the Browse button.
6. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_WN3000RP.cfg.
CAUTION:
After you click the Restore button, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender until
it finishes restarting!
7. Click the Restore button.
A confirmation pop-up screen displays.
8. Confirm your decision.
The extender restarts. This process takes about one minute.

Return the Extender to Its Factory Settings

To reset the extender to factory default settings, you can use either the Factory Reset button
or the Erase feature. For information about the factory settings, see
on page 42.

Use the Factory Reset Button to Restore Factory Settings

CAUTION:
This process erases any settings that you configured in the extender.
N300 WiFi Range Extender
Monitor and Maintain the Extender
32
Factory Default Settings