2-1. Driving procedures
Turn signal lever
The turn signal lever can be used to show the following intentions of
the driver:
■
Turn signals can be operated when
Vehicles without a smart entry & start system
The engine switch is in the "ON" position.
Vehicles with a smart entry & start system
The "ENGINE START STOP" switch is in IGNITION ON mode.
■
If the indicators flash faster than usual
Check that a light bulb in the turn signal lights has not burned out.
Left turn
Right turn
Lane change to the left
(push and hold the lever
partway)
The left hand signals will flash
until you release the lever.
Lane change to the right
(push and hold the lever
partway)
The right hand signals will
flash until you release the
lever.
2
159