Bauknecht BLVMS 8100 User And Maintenance Manual page 15

5. Confirm by pressing
6. Place the dish in the oven and turn the "Browse" knob to position the cursor at "Start", then press
7. The display indicates which shelf food should be placed on. Do as instructed and press
cooking. To delay the start of cooking, see the relevant paragraph.
Please turn food
Notes: some dishes must be turned or stirred half way through cooking: the oven will emit an
acoustic signal and the display will indicate what action is required.
The initial cooking time displayed is merely for guidance: it can be prolonged automatically during
cooking.
Shortly before cooking time finishes, the oven prompts you to check that the food is cooked to your
satisfaction. If it is not, extra time can then be added manually by turning the "Browse" knob.
FAVOURITES
This oven allows you to store selected settings for cooking your favourite dishes.
At the end of cooking, "Press << to save" appears intermittently on the display.
If you wish to save the settings used for that specific recipe (function, cooking time, temperature...), press
the button <<. At this point, the display shows "Press OK to save".
Press OK to save,
<< to cancel
When the button
stored Favourites. If you wish to save it in a different position, you can change the number by turning the
Browse knob (- o +) before confirming your selection with button
has already been taken, the function will be overwritten.
If, on the other hand, you do not wish to store the settings, simply press the button
to another function by turning the functions knob or else switch the oven off.
To bring up your saved settings at a later date, turn the functions knob to the symbol
the stored functions, then turn the Browse knob to view the desired function.
Press button and then start cooking.
SETTINGS
1. To change some display settings, select "SETTINGS" from the main menu by turning the "Functions"
knob.
2. Confirm by pressing
acoustic signal, display brightness, time, energy saving function).
3. Select the setting to be changed by turning the "Browse" knob.
4. Press button
5. Follow the instructions of the display to change the settings.
6. Press button ; a message appears on the display confirming your selection.
N.B.: when the oven is switched off, if the ECOMODE (Energy saving) function is selected (ON), the display
switches off after a few seconds, showing the clock. To view information on the display and switch the light
on again, just press any keys or turn one of the knobs. During a cooking function if the ECOMODE is
activated the cavity lamp will be switched off after 1 minute of cooking and reactivated for each user
interaction. If, on the other hand, the function is not selected (OFF), after a few minutes the display is merely
dimmed.
KEY-LOCK
This function can be used to lock the buttons and knobs on the control panel.
To activate it, press
buttons are locked and the display shows a message and the symbol
during cooking. To deactivate it, repeat the above procedure. When the key-lock function is activated, the
oven can be switched off by turning the knob to 0 (zero). In this case, however, the previously selected
function will have to be set again.
: the display shows the approximate cooking time.
Cooking nearly finished
Please check on food
2 Forced Air
Press OK to save, << to cancel
is pressed, the oven will propose saving your selection as number 1 of 10 available
: the display shows which settings can be changed (language, volume of
to confirm.
and at the same time for at least 3 seconds. If activated, the functions of the
Cooking Finished at 19:45
Press to Prolong Cooking
Favourite
has been saved
. If the memory is full or the position
. This function can also be activated
EN37
.
to start
again and move on
and select one of