Removing The Rocker Arms And Camshaft - Yamaha YFM250RX 2008 Service Manual

ROCKER ARM, CAMSHAFT
REMOVING THE ROCKER ARMS AND
CAMSHAFT
1. Loosen:
• Locknut
• Valve clearance adjusting screw
2. Remove:
• Stopper plate
3. Remove:
• Camshaft
• Bearing
NOTE: NOTE:
Screw 10 mm (0.396 in) bolt
threaded end of the camshaft and then pull out
the camshaft.
4. Remove:
• Intake rocker arm shaft
• Exhaust rocker arm shaft
• Intake rocker arm
• Exhaust rocker arm
NOTE: NOTE:
Remove the rocker arm shafts with the slide
hammer bolt
Slide hammer bolt
Slide hammer bolt 6 mm
Weight
4-16
ENG
and weight .
90890-01083
YU-01083-1
90890-01084, YU-01083-3
into the