Installing The Clutch Lever; Installing The Brake Master Cylinder - Yamaha YFM250RX 2008 Service Manual

STEERING SYSTEM
EBS00452

INSTALLING THE CLUTCH LEVER

1. Install:
• handlebar switch
• clutch lever
• clutch lever bracket
NOTE: NOTE:
• Install the clutch lever bracket as shown.
• Install the clutch lever
as shown.
53 ~ 54 mm (2.09 ~ 2.13 in)
EBS00453
INSTALLING THE BRAKE MASTER
CYLINDER
1. Install:
• throttle lever assembly
• spacer
• brake master cylinder
Brake master cylinder bracket
7 Nm (0.7 m•kg, 5.2 ft•lb)
NOTE: NOTE:
• Engage the indentations
the lobes on the throttle lever assembly
and brake master cylinder.
• The "UP" mark on the brake master cylinder
bracket should face up.
• Install the brake lever
as shown.
6-46
CHAS
at 10 degrees angle
in the spacer with
at 10 degrees angle