Ford 2010 Escape Hybrid Owner's Manual page 100

Locks and Security
status menus will include the remote start system as an additional key in
the total count. See the Check MyKey™ system status section.
Note: For all vehicles with remote start installed, it is possible to
program all original vehicle keys as MyKeys™, in which case, you will
need to use your remote start system to reset all MyKeys™ as admin
keys by doing the following:
1. Enter the vehicle, close all doors.
2. Remote start the vehicle using your remote start fob.
3. Follow Steps 1-4 in the Disable MyKey™ section.
Troubleshooting
Condition
Can't create a
MyKey™
Cannot program the
MyKey™ optional
settings
Cannot disable
MyKey™
100
Potential Causes
• Key in the ignition is already a MyKey™
• Key in the ignition is the last remaining admin
key (there always has to be at least one admin
key)
• SecuriLock passive anti-theft system is
disabled or in unlimited mode
• Vehicle has been started using a remote start
system that is programmed as MyKey™. Refer to
Using MyKey™ with remote start systems
section.
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the vehicle.
Refer to Create a MyKey™ section
• Vehicle has been started using a remote start
system that is programmed as MyKey™. Refer to
Using MyKey™ with remote start systems
section.
• Key in the ignition is a MyKey™
• No MyKeys™ are programmed to the vehicle.
Refer to Create a MyKey™ section
• Vehicle has been started using a remote start
system that is programmed as MyKey™. Refer to
Using MyKey™ with remote start systems
section.