Accurist MB916 Setting Instructions Manual page 11

10
Winding the mainspring
An automatic winding watch can also be hand wound by turning the crown
clockwise in Normal position. Wind several times clockwise. It will start to
move naturally.
Setting the time
1. Pull the crown out to the 2nd position.
2. Turn the crown to set hour and minute hands.
3. Push the crown back to the normal position.
Setting the Date
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and 4:00 AM, the date may not
change on the following day.
3. After the date has been set, push the crown back to the normal position.