4.13.3 answer a Call Using power fail back-Up Mode
If there is only one handset registered to the base
1.
When the phone rings, keep the handset on the main base unit and press
to answer the call. The speakerphone will be turned on automatically and call is
answered.
2.
To end the call, press
If there is more than one handset registered to the base, the handset on the main
base unit should be left as a power supply of the base and you can use the other
handset(s) to receive calls like normal.
NOTES
•
The power supplying handset should always be placed on the main base unit for the
entire length of the call.
•
The range of the base unit is limited during Power Fail Back-Up mode. Keep the
handset close to the base unit.
•
In power failure back-up mode none of the base functions and your cordless phone
will operate.
4.14
Make an Internal Call
This feature is only applicable when there are at least two registered handsets. It allows
you to make internal calls, transfer external calls from one handset to another handset
and make conference calls.
4.14.1 Call another Handset
1.
In idle mode, press
handset.
2.
Press
to select the handset you want to intercom with or all to call all the
p q
other registered handsets, then press
3.
The called handset rings. Press
call.
NOTES
•
If only one handset is registered to the base station, pressing
poSSIble".
•
If only two handsets are registered to the base station, pressing
another handset immediately.
4.14.2 Call all Handsets
1.
In idle mode, press
handset.
2.
Press
to select all to call all the other registered handsets, then press
p q
confirm.
.
. The registered handsets will display except the calling
to confirm.
on the called handset to establish the internal
. The registered handsets will display except the calling
20
will display "noT
will call
to