Honda AQUATRAX R-12X 2005 Owner's Manual page 46

Controls & Features
To Change the ID Number
1. Insert the lock clip in the engine stop
button/switch to turn on the display.
2. Press and hold the ID No. button for at
least 2 seconds. The display will switch to
the change mode with the ID No. mark and
first digit of ID number appearing.
3. Enter the current number.
4. Enter the new number.
5. To register the new number, press and hold
the ID SET buttom.
After the change is completed, the beeper will
sound once.
"000" cannot be used as an ID number.
38
Instruments & Controls