System Boot Control Settings - SOYO SY-7VBA 133 User Manual

BIOS Setup Utility

3-1.4 System Boot Control Settings

System Boot
Control Settings
Quick Power On
Self Test
Boot Sequence
3-1.5 Other Control Options
Other Control
Options
Soft-Off by
PWR-BTTN
Memory Ultra
fast
Modem Ring
Resume
Setting
Disabled
Enabled
A, C, SCSI
C, A, SCSI
C, CDROM, A
CDROM, C, A
D, A, SCSI
E, A, SCSI
F, A, SCSI
SCSI, A, C
SCSI, C, A
C only
LS/ZIP, C
Setting Description
Instant-off
Delay 4 Sec. Turns off the system power 4
seconds after pushing the power
button.
Disabled Setting this item to be enabled will
set the memory to run at the fastest
Enabled
speed. Only use this setting with
good quality DIMM modules.
Disabled An input signal on the serial Ring
Indicator (RI) line (in other words,
Enabled
an incoming call on the modem)
awakens the system from a soft off
state.
Description
Provides a fast POTS at
boot-up.
Choose the boot sequence
adapted to your needs, for
example:
l
[A, C, SCSI] means
the BIOS will look for an
operating system first in
drive A, then in drive C,
and eventually in SCSI
device.
59
SY-7VBA 133
Note
Default
Note
Default
Default
Default