Printer Section; Paper Support Assy; Stacker Assy - Epson Stylus CX4300 Service Manual

EPSON Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450

4.3 Printer Section

4.3.1 Paper Support Assy.

Part/Unit that should be removed before removing Paper Support Assy.
None
Removal Procedure
1. Release the Paper Support Assy. from the guide pins (x2) of the Lower Case, and
remove the Paper Support Assy. from the Lower Case.
Paper Support Assy.
Figure 4-3. Removing Paper Support Assy.
DISASSEMBLY/ASSEMBLY
Lower Case
Guide Pins

4.3.2 Stacker Assy.

Part/Unit that should be removed before removing Stacker Assy.
None
Removal Procedure
1. Open the Stacker Assy.
2. Press in the white pin on the left with a precision screwdriver or a similar tool to
release the left side of the Stacker Assy. Then remove the Stacker Assy. pulling
out its pin on the right from the Lower Case.
Left side
Press in the
white pin
Figure 4-4. Removing Stacker Assy.
Printer Section
Revision A
Stacker Assy.
Right side
65