Samsung HLS5087WX/XAA Service Manual page 30

Alignment & Adjustment
10. SDP51(S)
No Item
1 Y_Offset
2 Y_Gain
3 NR_Zeromotion_MD
4 NR_Fullmotion_MD
5 NR_Zeromotion_MC
6 NR_Fullmotion_MC
7 VPP_ON
8 VPP_Gain
9 VPP_Coring
10 ST_Field_CNT
11 ST_Ver_Mot_Min
12 ST_Ver_Mot_Max
13 ST_Def_Min
14 ST_Def_Max
15 ST_Ticker_Min
16 ST_Ticker_Max
17 ST_2:2_Min
18 ST_2:2_Max
19 Mo_Ver_Mot_Min
20 Mo_Ver_Mot_Max
21 Mo_Def_Min
22 Mo_Def_Max
23 Mo_Ticker_Min
24 Mo_Ticker_Max
25 Mo_2:2_Min
26 Mo_2:2_Max
27 Spatial_Angle_TH
28 Ticker_Mode
29 Debuger_Mode
30 3:2_Mode
31 2:2_Mode
32 32_22 Combi
33 3:2Count
34 2:2Count
35 TD_LINES
36 CAPTION_AREA_UP
37
CAPTION_AREA_DOWN
38 FILM_32_22
39 Test Pattern(SDP51S)
3-14
Range Default
0~1023 0
0~2047 512
0~255 28
0~255 56
0~255 28
0~255 56
0~1 0
0~255 30
0~47 5
0~7 5
0~255 5
0~255 64
0~255 5
0~255 64
0~255 2
0~255 18
0~255 5
0~255 64
0~255 3
0~255 12
0~255 2
0~255 12
0~255 32
0~255 64
0~255 0
0~255 0
0~1023 300
0~3 3
0~7 0
0~3 1
0~3 1
0~3 3
0~255 10
0~255 40
0~1023 180
0~1023 30
0~1023 180
0~3 3
0~19 0
Remark
Direction Offset of the input Y
Gain of the input Y
Gain control for Motion detecton
Gain control for Motion compensation
0 : VPP OFF , 1 : VPP ON
Coring for the detail vertical filter.
The number of the referenced field for the still discrimination.
VM: vertical motion
TD: ticker detection
2:2 detection (normaly source 3:2)
0 : vertical interpolation(do not use directional information)
0 : ALL OFF, 1 : interlace only, 2 : except film, 3 : ALL ON
0: off, 1 : film, 2:Stop, 3:Motion, 4: Moving 5:judder, 6: ticker, 7: weigh
3 : All of the film modes for the current filed are off if there is judder.
1 : Only the pixel with judder is off. The REG_FLM_32_MODE is the
same as the above.
3 : ALL ON, 2 :film23 ON/film22 OFF, 1 : film23 OFF/film 22 ON, 0 :ALL OFF
www.fieldtechsource.net
Samsung Electronics