Deck Panel Link Construction/Operation; Construction; Operation - Mazda 3 2007 Service Highlights

DECK PANEL LINK CONSTRUCTION/OPERATION

Construction

• The links rise according to the rotation of the deck panel links to fully open or close the deck.
• The deck panel limit switch is installed to the deck panel link (RH).
• The guide for the deck panel manual open/close is installed to the deck panel base link. (Refer to the Workshop
Manual for the procedure.)
DECK PANEL LINK A
DECK PANEL
SECTOR GEAR
DECK PANEL MOTOR

Operation

1. The deck panel motor starts to rotate based on an operation signal of the power retractable hardtop control
module.
2. The sector gear rotates according to the deck
panel motor rotation, and the lock pin area of the
deck panel base link and sector gear are
disengaged.
3. The knob presses deck panel link A upward by
the rotation of the sector gear.
EXTERIOR TRIM
DECK PANEL BASE LINK
DECK PANEL LINK B
DECK PANEL CLOSE POSITION SWITCH
SECTOR GEAR
DECK PANEL OPEN
POSITION SWITCH
(DECK PANEL LIMIT SWITCH)
KNOB
SECTOR GEAR
(DECK PANEL LIMIT SWITCH)
PIN
GUIDE
DECK PANEL BASE LINK
LOCK PIN
KNOB
DECK PANEL MOTOR
KNOB
id091600101600
amxuun0000005
DECK PANEL LINK A
amxuun0000001
DECK PANEL LINK A
DECK PANEL MOTOR
amxuun0000005
09-16–15