Setup Wi-Fi™ Connections - ACN Netgear N300 Quick Start Manual

Setup Wi-Fi™ Connections (optional)
By default, Wi-Fi™ is turned on and is secured using Wi-Fi™ Protected Access
with a Pre-Shared Key (WPA2-PSK).
Please take note of your Wi-Fi™ Network Name (SSID) and Network Key
(Password) printed on the sticker attached to the bottom of your Modem
Router, as these are necessary to connect to wireless devices.
To connect a Wi-Fi™ enabled device (such as your laptop, mobile phone,
tablet or gaming device) to the Internet please ensure that the Wi-Fi™ on the
device is switched on. Then select your wireless network (this is your Wi-Fi™
Network Name [SSID]) and click 'Connect' .
You will be required to enter your Network Key (Password) and 'Connect' .
Please note the password is case sensitive.
Your Modem Router will now be connected and you will be able to access
the Internet.
9