Care And Maintenance - SeaDoo ZS05 User Manual

To replace a flat battery with a fully charged battery.
1. Follow the steps 1 to 7 on page 12, to open the
SEASCOOTER ™ .
2. Unplug the battery at the socket by pressing the locking
feature shown in figure 7.
3. Remove the flat battery.
4. Install and connect the charged battery in the correct
position - the leads of the battery must be oriented as
shown on the sticker on the battery, see figure 12.
5. Follow steps 17 to 22 on page 14 and 15, to close the
SEASCOOTER ™ .
Buying batteries
Additional standard or extended batteries can be
purchased separately. Contact your local customer service
centre/distributor to purchase them.
17
Battery Care
• Please read and understand important Battery Use
safety information on pages 9 to 12.
• The battery supplied with your SEASCOOTER
last about 200 cycles or two years before it should be
replaced. Please contact your local customer service
centre/distributor. Using a battery in excess of these
recommendations can result in excessive of gassing of
explosive gas.
• ALWAYS remove the battery from the SEASCOOTER
immediately after use.
• DO NOT STORE BATTERY IN SEASCOOTER
Care after using the SEASCOOTER
• Always rinse the SEASCOOTER
allow it to dry before storage.
Fig.12 • Whenever possible rinse the SEASCOOTER
water immediately after use.
• To clean the SEASCOOTER
only use a damp cloth to wipe the unit clean.
• The Battery Housing interior should be kept dry at all
times.
• If the Battery Housing interior ever gets wet, see page
24, Accidental Flooding for procedure.

Care And Maintenance

™
™ in fresh water and
™
™ do not use detergents,
18
™ should
™
™
in fresh