Setting The Fan Operation - Carrier PROGRAMMABLE THERMOSTAT Homeowner's Manual

PROGRAMMING THE THERMOSTAT
and AUTO
will rotate on the display.
If you have a heat pump, the display
will show OFF, HEAT, COOL, AUTO,
and EHEAT.
NOTE: In AUTO mode, your system will heat OR
cool as needed to reach your temperature settings.
AUTO mode may be turned off. Contact your
indoor weather expert for details.
3
Continue to press the MODE
button until you reach the desired setting.

Setting the fan operation

1
Press the FAN button to switch
between ON and AUTO fan settings.
When the ON mode is selected, the fan runs
continuously for improved air circulation.
When the AUTO mode is selected, the fan
runs only as needed to maintain your indoor
temperature settings.
3