Service Adjustment Mode - Mitsubishi Electric WD-52631 Service Manual

6. Terminating the circuit adjustment mode
Press the "MENU" button on the remote hand unit twice to terminate the adjustment mode, or press "EXIT" once.
Note: The adjustment mode can be also terminated by turning the
power off.
Data Transfer
1) Enter the Service Adjustment Mode ... Press "MENU-2-4-5-7"
2) Press "0" when in the Service Mode ... Four choices appear at the top of the screen.
Display
Copy Engine E2PROM to DM
Restore factory data
DOWNLOAD WB ALIGNMENT TO FMT
3) Use the UP & DN keys to highlight the desired choice, then Press "ENTER"
MODEL: WD-52631 / WD-57731 / WD-65731
DATA TRANSFER
Transfers Engine data to DM E2P (after DM or Engine replacement)
Restores factory set values
Copies WB data from E2P to FMT (after PWB-DM replacement)_
Page 25
Description