Imap Qcon Ex Software Panel; Firmware Upgrade - ICON QConEX User Manual

Usb-midi controller station, expansion unit for qcon pro - midi/audio control surface with motorized faders for production

Table of Contents

iMap Qcon EX software panel

"Firmware Upgrade" button

Click this button to enter into the firmware upgrade window for Qcon EX.

Please refer to P.10 for the firmware upgrade procedure.

Step 1: Connect the ICON product using a USB connection. Press the "MIDI

Device" button at the top to select your connected ICON product as the

"MIDI In and Out" device at the pull-down menu.

Note: If your connected ICON product model name does not appear on the

pull-down menu, select "USB Audio" as the MIDI In and Out device.

Step 2: Click the "Update" button.

Step 3: Press the "MIDI Device" button at the top to select your connected

ICON product as the "MIDI In and Out" device at the pull-down menu.

Step 4: Click the "Open File" button to browse the new firmware file.

Step 5: Click the "Upload" button to upload the firmware.

Warning:The firmware upload process "MUST" be completed and not be interrupted

during the file uploading, otherwise the firmware may not be rewritten again.

Table of Contents

Do you have a question about the QConEX and is the answer not in the manual?