Using The Mounts - GoPro Hero User Manual

/ Using the Mounts

ATTACHING YOUR CAMERA TO MOUNTS
To attach your HERO camera to a mount, you need a Quick Release
Buckle, thumb screw or hardware depending on the mount you are
using. For more information on mounts, visit gopro.com/support.
Quick Release Buckle + Thumb Screw + Slim housing = Complete Unit
Quick Release
Thumb Screw
Buckle
Slim housing closed Swapping housing doors
USING CURVED + FLAT ADHESIVE MOUNTS
The Curved + Flat Adhesive Mounts make it easy to attach the camera
to curved and flat surfaces of helmets, vehicles, and gear. Using the
Quick Release Buckle, the assembled camera housing can be clicked
on and off the secured Curved or Flat Adhesive Mounts.
Slim housing remove camera
Flat Adhesive Mount
42
Housing Complete Unit
Curved Adhesive Mount
MOUNTING GUIDELINES
Follow these guidelines when attaching mounts:
• Attach the adhesive mounts at least 24 hours before use. Allow
72 hours for complete adhesion.
• Adhesive mounts must be mounted only on smooth surfaces.
Porous or textured surfaces do not enable a proper bond. When
applying the mount, firmly press it into place and ensure full
contact over the entire surface.
• Apply adhesive mounts to clean surfaces only. Wax, oil, dirt, or
other debris reduce adhesion, which can result in a weak bond
and risk of losing the camera should the connection fail.
• Attach adhesive mounts in room temperature conditions.
Adhesives do not bond properly if applied in cold or damp
environments to cold or damp surfaces.
For more information on mounts, visit gopro.com/support.
WARNING: If using your camera with a GoPro helmet mount or
strap, always select a helmet that meets the applicable safety
standard. Choose the right helmet for your particular sport or
activity and make sure that it is the right fit and size for you.
Inspect your helmet to ensure that it is in good condition, and
Slim housing insert camera
follow the helmet manufacturer's instructions on safe helmet
use. Any helmet that has sustained a major impact should be
replaced. No helmet can protect against injury in every accident.
/ Using the Mounts
43