The Menu System; Entering And Exiting The Menu; From The Soundscape's Top Panel; Via The Soundscape's Remote - Paradigm Soundscape Owner's Manual

THE MENU SYSTEM

ENTERING AND EXITING THE MENU

SYSTEM

From the Soundscape's Top Panel

To access the Menu System from the Soundscape's top panel,
press and hold the 'Menu' button (Fig. 13).
Via the Soundscape Remote
To access the Menu System from the remote, press 'Menu'
(Fig. 14). To exit, press 'Menu' again or select the 'Left' button.

How to Use the Navigation Buttons

HOW TO USE THE
NAVIGATION BUTTONS
'Menu' button enters top
level menu or exits the
menu system.
'Right' arrow button goes
down deeper into a menu.
'Left' arrow button and
for exiting the menu.
'Up' button increases
the value of a setting
(i.e. volume) or scrolls up
through options
'Down' button decreases
the value of a setting (i.e.
volume) or scrolls down
through options
'Select' button chooses/
sets options and exits
menu level.
EN-19

MENU OPTIONS

Menu Option: MODE
'MUSIC': Scroll to select 'MUSIC'. To choose 'MUSIC', press
'Select' then 'Scroll Up'
all of the additional mode options.
'MOVIE': Scroll to select 'MOVIE'. To choose Movie press
'Select' 'Scroll Up'
the additional mode options.
'LOUDNES' [LOUDNESS]: Enter the 'SUROUND' submenu
by pressing the 'Scroll Right' directional button. To activate
press 'Select' for 'ON', to deactivate press 'Select' for 'OFF' .
'BASS': Enhance (+) or decrease (-) bass output in 2-dB
REMOTE
TOP PANEL
increments. Activate by pressing the 'Scroll Right' directional
CONTROL
button, find your desired setting, press 'Select' and the
Soundscape will respond with 'SET' .
'TREBLE': This mode allows you to enhance (+) or decrease
(-) treble output in 2 dB increments. Activate by pressing the
'Right' directional button, find your desired setting, press
'Select' and the Soundscape will respond with 'SET' .
'SUROUND' [SURROUND]: Enter the 'SUROUND' submenu
engage Paradigm's Virtual Surround Sound by pressing the
'Scroll Right' directional button. This menu allows you to turn
Soundscape's surround channels 'ON' or 'OFF'.
'SUROUND'
the
to fully reproduce all 5.1-channels of information including
simulated surround channels.
the 'Select' button and the Soundscape will respond with 'SET' .
'SUROUND' >'OFF' [SURROUND OFF]: This option configures
the
content) to down-mix to 3.1-channel output (left/center/right
channels + external subwoofer) and does not use simulated
surround channels. All content originally intended for the
surround channels is routed to the left/center/right channels.
Activate the option by pressing the 'Select' button and the
Soundscape will respond with 'SET' .
TIP! Both multichannel and stereo sound can be heard as
surround.
default Mode is 'Stereo' .
or 'Scroll Down'
or 'Scroll Down' to activate any/all of
> 'ON' [SURROUND ON]: This option configures
Soundscape (when it detects 5.1-channel encoded content)
Activate the option by pressing
Soundscape (when it detects 5.1-channel encoded
When not in Surround Mode, the Soundscape's
to activate any/
to