Menu Items - Samsung Series 673 Installation Manual

Menu Items

¦
To Enter this menu: Press the
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu
Hospitality
Hospitality Mode
Mode
SI Vendor
SI Vender
Power On Channel
Power On Channel
Power On Channel
Power On Volume
Power On
Power On Volume
Min Volume
Max Volume
Power On Source
Power On Option
Channel Editor
Channel Bank Editor
Channel
Channel Bank Service
Dynamic SI
Channel Auto Store
Mute On CC
[HG673-ZA]Install Guide-X0ENG.indd 13
→ → → → ENTERE buttons in order.
MUTE 1 1 9
Item initial Value
Select Hospitality mode.
Standalone Interactive mode : TV works with an SI STB or SBB.
y
Stand-alone mode : TV works alone, without an SI STB or SBB.
y
Interactive mode : Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardinal /
y
Guestek / Seachange / EBL
OFF
Stand-alone mode : OFF / Smoovie
y
Set the default values that will be applied when the TV is turned on.
User Defined : Lets you set Power On Channel and Channel Type manually. See
y
Last Saved Power On Channel and Channel Type below.
Last Saved : If you select this item, when the TV is turned on, it displays the
y
channel it was displaying when it was turned off.
... When the TV is turned on, it switches automatically to this channel.
Num
Select channel band : AIR (analog air band), DTV (digital air band), CATV (analog
y
...
Type cable band), CDTV (digital cable band)
User Defined : Lets you set the Power On Volume manually. See Power On
y
Volume below.
Last Saved
Last Saved : When the TV is turned on, it returns to the volume that had been set
y
when the power had been turned off.
... The TV turns on with this Volume Level in Stand Alone Hospitality mode.
Num
0 The minimum Volume Level the user can set in Stand Alone Hospitality mode.
100 The maximum Volume Level the user in Stand Alone Hospitality mode.
TV Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
LAST OPT : Returns to its last Power state. If it was in Stand-by, it returns to
y
Last Option
Stand-by. If it was on, it turns on.
Power On : When the power returns, the TV turns on.
y
Standby : When the power returns, the TV enters the Standby mode.
y
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
• Change the channel numbers and names, and sort the channels in your desired
channel number order.
• Apply the video mute to channels you select. The video mute blanks out the video
from a channel and outputs only the sound while displaying a speaker icon on the
screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
Lets you edit the channel bank that works with the item of Channel Bank Service Level
or the Smoovie Remote.
Set the limitation of access to the TV channels that the patient (or the guest) can watch
with this item. See page 27.
Normal: All the channels available on the TV are accessible to the patient.
y
Normal
Bank1/2/3: Only the channels assigned to the selected channel bank in the
y
Level
Channel Bank Editor are accessible to the patient.
None: Channels cannot be changed by the patient. (The patient can watch only
y
one channel set when TV is turned on.)
On : Check the DTV Program channel number. (If Dynamic SI is On, it is not
y
availale to edit DTV channels in Channel Editor.)
OFF
Off : Does not check the DTV Program channel number. (If Dynamic SI is Off, it
y
is available to edit DTV channels in Channel Editor, but additional DTV channel
program number update is not supported.)
Gives you direct, immediate access to Auto Program for searching channels.
OFF Displays Subtitles on Mute
Description
English
13
2014-03-07 10:20:17