Led Control - Canon Powershot G15 User Manual

doctorseyes.com
4) How to activate the macro mode
Press the Tulip-Symbol
been activated when you see the tulip symbol in the
top of your display.
5) Assigning the focussing area to the center
of the display.
The AF frame indicates the area of the composition
on which the camera focuses. Select „center" - the
camera then fixes the AF frame at the center. This
is convenient for making sure the focus is exactly
where you want it.
How to assign to center focus:
1) Press MENU button
2) Select first section (AF Frame).
3) Select FlexiZone.
4) Press MENU button.
The white sqare (turns green when in focus) shows
area on display where camera will focus on.
The Focus Trick - how it's done:
1. Press the MENU button.
2. In the menu, use the Button to select [AF Fra-
me].
3. Aim your camera to the tooth or region
that should be in focus and slightly
press the release button without taking
a picture letting the camera focus. Keep your
finger on the button slightly pressed down holding
the point of focus and letting the AF frame turn
green.
4. Then adjust the camera's position until all the
teeth and details are shown in the display of the
camera.
5. Take the picture.
14
the world of digital dental imaging
. The macro mode has
doctorseyes.com

LED control

With the left button you can activate or deactivate
LEDS in 4 configurations (half ring right - half ring left
- simulation twin flash unit - full ring)
Technical specifications:
doctorseyes Power and Light Controller
Compact PLC-C
dimensions (mm)
weight
charging capacity
max. duration
voltage
charge display
charging voltage
charging time
The PLC-C was constructed according to the EN
60335-2-5 specification guide
the world of digital dental imaging
55 x 124 x 30
194g
2200 mAh
up to 3,5 hours
4,8 V =
yes
8V - 12V ~
approx. 3 hours
7