Canon Powershot G15 User Manual page 4

doctorseyes.com
Dear Dental Photographer,
Congratulations and thank you for choosing the
doctorseyes ring light System.
This manual will give you instructions and tips on
how to set up your Canon G15 to be used in con-
junction with the doctorseyes Ringlight and obtain
optimal imaging results. Our lighting system is
very easy to use and it's usage is very intuitive. In
section A you will find how to mount and operate
the ring light system. Section B will explain ca-
mera settings and section C will provide you with
further useful information and show some examp-
le setups for dental photography. Furthermore you
will find additional and more detailed information in
the camera's user's guide.
As we strive for continual product innovation, your
comments and suggestions are always welcome.
We hope you enjoy the world of digital dental
photography.
CEO of doctorseyes GmbH
Warning
Never look directly into the LED light beam. The
intense bright light can burn the retina.
If necessary, provide the patient with protective
eyewear or a mask.
Note: It is normal for the Ringlight to become
warm when in use.
Warning
When working with patients, do not leave the
power and light controller connected to the power
supply. In addition, never leave the camera con-
nected to its power supply.
2
the world of digital dental imaging
doctorseyes.com
Left or right
4) confirm with FUNC/SET button
we recommend using „L"
The best working distance when using the doctors
eyes ring light is 16 - 21,5 cm. This distance might
change according to the close-up lens you use.
Because of parallax error and for ergonomic reasons
you should only use the display and not the optical
viewfinder to determine the image section.
2) Connecting the camera to a computer. &
printing pictures
Connect the supplied interface cable to the
computer's USB port and to the camera's DIGITAL
terminal.
Open the camera's terminal cover and insert the
interface cable all the way into the terminal.
Preparing to download images to the computer.
1. Press the (Playback) button to turn on the camera.
The software supplied by canon must be installed on
your computer so that your pc can detect the came-
ra.. When starting the first time your PC will start the
recognition process operation. In case your PC does
the world of digital dental imaging
19