Operation Instruction; General Instructions; Control Button - Sharp LL-153A Service Manual

15" LCD Color Monitor
3. Operating Instructions

3.1 General Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the
monitor. By changing these settings, the picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• Press the power button to turn on the monitor position. The power indicator will light up.
3.2 Control Buttons
- Power Button:
When pressed, the monitor enters the off mode, and the LED turns blank. Press again to restore normal status.
- Left / Right Button:
The Left/Right Button is used to control the monitor functions. Press to switch functions or adjust settings.
- /MODE:
The /MODE Key is used to move the cursor and select display mode.
- Power Indicator:
Green — Power On mode.
Red — Power Saving mode.
Blank —Power Off Mode.
LED = GREEN, BLINKING (0.5s period) —Out of Range
OSD Menu
Move the Cursor and
Select Display Mode
NO. Name
1 MENU
2
/MODE
<
3
>
4
5 POWER
6 Indicator Light
Volume/Bright +, -
& Menu Select
Within OSD
An adjustment menu display, a change,
elimination
Move the cursor to down
1.Move the cursor to left
2. Decrease the value of the selected item
1.Move the cursor to right
2.Increase the value of the selected item
Power On / Off
Green—On Red—Save
6
Sharp LL-153A
Indicator Light
Power On/Off
Without OSD
Activate OSD main menu
Select display mode to STD or
OFFICE or sRGB or VIVID.
Activate the volume and the bright
menu
Activate the volume and the
brightness menu
Power On / Off
Green—On Red—Save