FRONT END AND STEERING
Front end
The front suspension units are mounted on
a strong box member. The member is bolt-
ed firmly to the front section of the body.
The front wheels are j ournalled i n tapered
roller bearings. The front springs consist
of coil springs in which telescopic shock
absorbers are fitted. The car is provided
with stabilizers secured to the lower con-
trol arms and to the body.
Power steering
The power cylinder and steering valves are
built into the cam-and-roller type steering
gear. When the steering wheel is turned,
the guide valves direct the pressure oil
from the power pump to one of the sides
of the piston in the power cylinder. The
resultant pressure on the piston side af-
fected assists in turning the steering wheel.
TECHNICAL DESCRIPTION
ELECTRICAL SYSTEM
The electrical system is of the 12-volt type
and is fitted with a voltage-regulated alter-
nator. The starter motor is operated by
means of the ignition switch. This switch is
also the main switch for the rest of the
electrical system. The headlights, parking
li ghts and interior lighting, however, are
not wired via the ignition switch so they
can be switched on and off without having
to switch on the ignition key.
33