OPERATING INSTRUCTIONS
Automatic transmission
Gear selector positions
The gear selector positions are marked on
the console next to the gear selector.
The gear selector can be moved freely be-
tween positions D and 2 while the other
positions are provided with a gate which
i s "opened" by depressing the button in the
knob of the gear selector.
2 4
To change from D and 2 to positions N or
1 press lightly on the button with the palm
of the hand. With the button thus lightly
depressed, the selector lever can thus be
moved between the four positions, 1, 2, D
and N.
Changing to positions R and P requires
more force on the button with, e.g., the
thumb. This manipulation is also required
to move the lever out of P position. In
other words, when the button is pushed
down fully, the selector lever can be mov-
ed freely between all the transmission po-
sitions.
P-position
The P position is selected for parking with
or without the engine running. When park-
i ng on a hill, the parking brake should also
be applied.
I n P position, the gearbox is mechanically
l ocked.
The P position may only be selected when
the car is standing still.
R-position
The R position is used for reversing.
The R position may only be selected when
the car is standing still.
N-position
The N position is the neutral position, that
i s, no gear is engaged.
D-position
Position D is the normal driving position.
The car starts off here in first gear and
upchanges to second and
automatically
third gear according to road speed and
accelerator position. With decreasing ve-
hicle speed, you get automatic downchange
from third to second and first.
t