Accurist CP00 Instructions Manual page 12

11 11
CP00 Operating Instructions continued . . .
Troubleshooting continued . . .
The watch malfunctions in some way and the above procedures do not work.
1. Press the lower right button until the mode indicator hand points to TME.
2. Pull the lower right button out one click. Press the other three buttons down
simultaneously for three seconds and release. You will see 8's on the digital display.
3. Press the upper left button. You will see UTC on the top half of the digital display.
Press the upper right button to advance the hands of the top dial to the straight up
24-hour position. Use the lower left button to go in reverse.
4. Press the upper left button. You will see HR on the top half of the digital display.
Press the upper right button to advance the hour and 24-hour hand clockwise until
they both point straight up at the 24-hour position. Use the lower left button to move
the hand anti-clockwise.