Datalogic PowerScan PD8530 Reference Manual page 32

POWERSCAN® PD8530
Data Format-Symbology Independent Parameters
Code Identifier
Custom Code Identifier
Code Length
*Header
*Terminator
Data Format-Symbology Dependent Parameters
Symbology Specific Format
Header Symbology
Terminator Symbology
Symbology Character Substitution
Symbology Character Deletion
Data Format-Concatenation
Concatenation
Define Concatenation
Set First Concatenated Code Length
Set Second Concatenated Code Length
Set Third Concatenated Code Length
Set Fourth Concatenated Code Length
Concatenation with Intercode Delay
Concatenation Timeout
Concatenation Failure Transmission
Transmission after Timeout
Concatenation Result Code ID
Advanced Formatting
Format enable/disable
Camera Control
Exposure Mode
Power Save
Illumination Power
Illumination System Power
Code Selection
Issue Identical Codes

The default values of these parameters are set when reading the interface selection.
20
Disabled
Disabled
Disabled
No headers
CR and LF terminators for RS-232, USB
BULK, USB COM, USB Generic HID
ENTER terminator for Wedge, USB Kbd
Select All
No headers
No terminators
No character to substitute
No character to delete
Disabled
2 EAN/UPC codes concatenated
000 = any length
000 = any length
000 = any length
000 = any length
Disabled
10 seconds
Tx codes causing failure
No code transmission
No code Identifier
Disabled
Automatic, based on entire image
Max power
ON
Enabled