Datalogic PowerScan PD8530 Reference Manual page 16

POWERSCAN® PD8530
Follow the given procedure for correct cable insertion:
Align
2
1
A rrow
 Slip the cover over the cable.
 Push the plastic boot into the rubber gasket. Take care that the tab on the plastic
boot is aligned with the notch in the rubber gasket.
 Push the plastic boot and gasket into the handle. Ensure that the "Front" marking
on the plastic boot is facing out
scanner.

Insert the cable into the socket of the plastic boot.

Insert the cable spacer into the cable wire and slide it towards the handle.
 Push the cover along the cable towards the reader, and hook it over the yellow
"tooth".
 Insert the strain relief into the cover and tighten the screw to fix the whole
assembly to the reader handle.
4
3
Notch
Tab
, with the arrow pointing towards the front of the
5
6
4
7