Call Features; User Options; Programming Features - NEC Conference Max Plus User Manual

8

User Options

Call features

In addition to the basic phone operations described in the previous section, you can per-
form any of the following functions during a call: change to pulse dialing, send a flash
signal, display phone number, adjust speaker volume, or turn the ringer on/off.
To use pulse dialing
The NEC Max Plus uses tone dialing by default. You can temporarily change to pulse
dialing during a call.
• Press the star (*) key. A special character will appear. All numbers entered after this char-
acter will use pulse dialing. When the call is finished, the dialing mode will revert to tone.
Note: When more than 18 characters are entered, a scroll button will appear on the LCD
display and the numbers will scroll from right to left.
To send a Flash signal
• If your telephone service includes call transfer, call waiting, or conference calling, you can
use the Flash key. Refer to your local telephone service for details.
To display your local number during a call
• Press CLEAR.The phone number will appear. After several seconds, the call timer will
return.
To adjust loudspeaker volume
• Press the VOLUME UP key while on a call to increase volume.
• Press the VOLUME DOWN key while on a call to decrease volume.
To turn the ringer on/off
• Press and hold the star (*) key.The
Ringer Off icon will illuminate when
ringer is turned off.The icon will not
appear when the ringer is on.

Programming features

To allow for individual preferences and enhance ease of use, seven features can be
programmed: Ringer melody, dialing mode, flash duration, local phone number,
conferencing services number, service center number and AGC/ALC. You may also
restore factory defaults.
NEC Conference Max Plus — User Options
Ringer Off
Figure 9. Ringer Off icon. When the ringer is
off, LEDs will flash to indicate incoming call.
NEC Conference Max Plus — User Options
To change ringer melody
Press and hold the key until the
1. REDIAL/PROG
Program icon appears on the LCD screen.
2. Press 1 to enter the Ringer Melody menu.There
are five available melodies.
3. Press REDIAL/PROG.The current melody selec-
tion will flash.
4. Press keys 1–5 to play the corresponding melody.
The selected melody will play once.
5. Press REDIAL/PROG to save the selection. Press CLEAR to exit programming.
To change dialing mode
1. Press and hold the key until the Program icon appears on the LCD
REDIAL/PROG
screen.
2. Press 2 to enter the Dialing Mode menu. There are two dialing modes: tone and pulse. The
current dialing mode will be displayed (T for tone, P for pulse).
3. Press REDIAL/PROG .The current mode will flash.
4. Press 1 to select tone or 2 to select pulse.
5. Press to save the selection. Press CLEAR to exit.
REDIAL/PROG
To change flash duration
1. Press and hold the key until the Program icon appears on the LCD
REDIAL/PROG
screen.
2. Press 3 to enter the Flash Duration menu.The current duration will be
displayed in milliseconds.There are five duration settings: 600, 300, 150, 100 and 80.
3. Press REDIAL/PROG .The current duration will flash.
4. Press keys 1–5 to select a new duration setting.
5. Press to save the selection. Press CLEAR to exit.
REDIAL/PROG
To program local phone number
1. Press and hold until the Program icon appears on the LCD screen.
REDIAL/PROG
2. Press 4 to enter the user phone number menu.
3. Press .
REDIAL/PROG
3. Enter the local phone number.
Note: To add a pause to the phone number, press and hold the pound (#) key.To add a dash to
the phone number, press and hold the 1 key.To add a space to the phone number, press and hold
the star key (*).
4. Press to save the number. Press CLEAR to exit.
REDIAL/PROG
Note: If a number has already been programmed, use CLEAR to delete the old number before
entering the new number.
9
Program icon
Figure 10. Programming options