Combining Lettering With A Motif - Bernina artista 200 Embroidery Owner's Manual

M
ASTERING
Y
OUR
BERNINA
®

COMBINING LETTERING WITH A MOTIF

Owner's manual pg.___
• Select the Motif folder.
• Select the Butterfly motif.
• Touch the Add Motif symbol.
• Select the Alphabet folder.
• Select the Alice font.
• Input the word "Create" and touch OK.
• Retrieve the Butterfly motif.
• Go to Edit 2 and Rescale the motif Proportionally to 70%.
• Using both the Move Motif and Rotate functions, move the butterfly up - make it look like it is flying.
• Retrieve the word "Create".
• Go to Edit 2 and use the Letter Manipulation function to
- Change the Height of the lettering to 18mm
- Change the Spacing to 3mm
- Choose the Curved (arched) baseline BELOW the largest green circle
• Touch OK.
• Again, using both the Move Motif and Rotate function, move the lettering down until it is in a
pleasing position.
• When the entire combination is the way you would like it to be, touch OK.
• Select the Recalculation option.
• After hooping the fabric and stabilizer in the Medium hoop, embroider the combination.
• Trim and mount the sample on the following page.
BERNINA
M Y
ASTERING OUR
BERNINA
Fabric: Firm fabric and stabilizer, 8" x 10"
Needle: Embroidery
Thread: Isacord embroidery thread
Choose colors to match the motif
Presser Foot: Embroidery Foot #15
Built-in Motifs: Butterfly motif and Alice alphabet
®
9 /1/02 S
ECTION
®
artista 200 Embroidery
B
artista 200 Embroidery/41