Table of Contents
Advertisement
THE DOOR SEAL, WHICH WOULD NOT BE RECTIFIED UNDER
THE GUARANTEE FREE OF CHARGE.
IMPORTANT: WHEN YOU HAVE REVERSED THE DOORS OF THE
APPLIANCE; AS YOU HAVE PLACED THE APPLIANCE ON ITS
SIDE, YOU MUST WAIT FOR 8 HOURS BEFORE SWITCHING THE
APPLIANCE BACK ON.
Aperture dimensions and ventilation requirements
o If necessary, you should utilise extra filler shelves to fill any
additional space that you have in the aperture.
o The diagram on the next page shows the ventilation cut outs
needed in order to install the appliance. For the product to
operate correctly it is essential to allow adequate air circulation
to cool down the condenser located in the rear part of the
appliance.
o The housing unit must be equipped with a rear chimney with an
upper opening that must not be blocked and a front slot which
should be covered with a ventilation grill.
The appliance aperture
should be:
Height- 1772-1776 mm
Depth- 550 mm
Width- 560 mm
25
Advertisement
Table of Contents
