Table of Contents
Advertisement
o Once all the ice that has built up has melted, then the inside of
the freezer compartment should be dried thoroughly. Failure to
do this will result in immediate ice build when the appliance is
turned back on.
o With dry hands, reconnect your appliance to your mains supply.
Set the thermostat knob back to its maximum position for a 24
hour period, before switching it to its normal position of <3> or
<4>.
o You should not attempt to freeze fresh food inside the freezer
compartment until this 24 hour time period has elapsed.
o Do not defrost the appliance with other electrical devices
(e.g. hair dryer). Do not use sharp metal objects to
remove the ice on the freezer, as this could cause damage
to the refrigerant system.
Replacing the light bulb
WARNING: PLEASE ENSURE THAT YOUR
APPLIANCE IS DISCONNECTED FROM
YOUR
ATTEMPTING TO REPLACE THE LIGHT
BULB.
MAINS
SUPPLY
o Adjust the thermostat to position
"0" and remove the plug from
the socket.
o Use a flat screwdriver to lift
up the grid and remove the
see-through cover.
BEFORE
o Remove the light
bulb and replace
with a bulb of the
same
type
wattage.
and
20
Advertisement
Table of Contents
