Table of Contents
Advertisement
process will take about 2 minutes.
(2) Setup Interface
Connect your player to your computer, copy and change the
update file (xxx.bin) into "update.bin" and then disconnect the
player from computer. Enter setup interface, select the system
and click the "Enter" button. It will prompt you to update the
system. Then click the "Enter" button again to start the update
process.
When the update is finished, click any button to shut off the
player. Restart the player and you will enjoy a player with a new
operating system and new functions.
Notice:
Before the updating process, please make sure the correct
update file that matches the player is being used.
Make sure that the player will not shut down during the updating
process to avoid the unwanted error.
After updating please delete the updating file (xxx.bin).
5.11 Hardware Reset
The player may be locked because of some special reasons
(such as static discharge). Please take down the battery to reset
the hardware.
5.12 One Button Audio Record
When you play video, music, or photo, or use the USB, or copy
via USB-OTG, the record button is Non-effective. At any other
time you can use this function.
5.13 TFT/TV switch
Advertisement
Table of Contents
