Setting Ctcss Codes - West Marine VHF 250 Owner's Manual

names, use ▲ or ▼ to highlight Default All located
between Channel 88
highlight Yes then press ENTER to restore all the
original names. A double beep sounds to confi rm the
action.
2. To restore only one name to default, highlight the
channel by using ▲ or ▼then press ENTER. Then
use ▲ or ▼ to next highlight Default.

Setting CTCSS Codes

[FRS Band Only]
If you encounter interference
from another FRS radio while
using the FRS band, enabling
one of the 142 CTCSS codes
may prevent that interference.
1. With the FRS band
operational, momentarily
press MENU.
2. Use ▲ or ▼ to scroll to CTCSS.
3. Press ENTER. The currently used FRS channel is highlight-
ed. To select a different channel, press either ▲ or ▼
4. Press ENTER to choose it. You can select ON, OFF,
or EXIT, next.
5. Use ▲ or ▼ to choose ON (to associate a CTCSS
West Marine VHF250 Radio Owner's Manual
and Exit. Use ▲ or ▼ to
A
41