Installing The Lithium Ion Battery Pack; Using The Alkaline Battery Pack - West Marine VHF 250 Owner's Manual

Marine multi-band transceiver
Table of Contents

Advertisement

Installing the Lithium Ion Battery Pack

1.
To install the Lithium Ion Battery Pack, insert the
upper contacts on the lower edge of the battery area
on the radio back as shown in the fi rst illustration.
2.
Lower the pack until it is fl at in the chamber
3.
Bring the locking latch up and lock it into place to
secure the pack.
Insert Battery
Insert Battery

Using the Alkaline Battery Pack

The radio is supplied with a battery pack that can hold four
AAA type alkaline batteries (not supplied). For longest useful
life we suggest using an extra strength battery such as
Duracell Ultra
batteries.
®
Note: When powering the radio by alkaline batteries,
transmit power is limited to a maximum of 2.5 watts.
To install the four AAA batteries in the alkaline battery pack,
refer to the following steps and illustrations.
1.
Hold the lower part of the pack and with the other
West Marine VHF250 Radio Owner's Manual
Close and Lock Latch
Close and Lock Latch
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents