Accessing The Menus; Usa/Can/Int (U.i.c.) - West Marine VHF 250 Owner's Manual

Accessing the Menus

To access the menu selections for each band, change to that
band and press MENU. To exit a menu for any band, press
MENU again or use ▲ or ▼ to scroll to EXIT on that menu.
Then press ENTER to return to the previous screen.
Note: if during any of the following operations you fail to
press a key or make a selection in more than 30 seconds,
the radio returns to standard marine mode. Each band has
several menu options in common while other choices are
specifi c to that band. The option order for each band is:
Marine Marine FRS FRS
VHF/WX VHF/WX
USA/CAN/INT USA/CAN/INT CTCSS CTCSS
Lamp Lamp
Lamp Adjust Lamp Adjust
Adjust Adjust
Contrast Contrast Contrast Contrast
Dual or Dual or
Dual or Tri Dual or Tri
Tri Tri
Watch Watch
Watch Watch
Key Key
Key Beep Key Beep
Beep Beep
FIPS Codes FIPS Codes Exit Exit
Channel Channel
Name Name
Exit Exit

USA/CAN/INT (U.I.C.)

[Marine Band Only]
The radio is set as a factory default
to the USA channel frequencies. To
change to either Canadian [CAN] or
International [INT] channels follow
these steps.
1. Press either ▲ or ▼ until you
West Marine VHF250 Radio Owner's Manual
AM AM FM FM Aircraft Aircraft
Lamp Lamp Lamp Lamp
Adjust Adjust Adjust Adjust
Lamp Lamp
Contrast Contrast Contrast Contrast
Adjust Adjust
FM FM
Contrast Contrast
Muting Muting
Tuning Tuning Tuning Tuning
Steps Steps Steps Steps
Key Key Key Key Key Key
Beep Beep Beep Beep Beep Beep
Exit Exit Exit Exit Exit Exit
35