Akai 42” Operating Insructions page 37

 Using the "Manual Scan" item
Manual Scan is used to manually search the receivable channels. There are
Add-on Mode and Range Mode.
After entering the "General" menu,
press or button to highlight
the "Manual Scan" item.
Press the Enter button to confirm.
Press or button to select
"Add Mode" or "Rage Mode".
Press the Enter button to confirm
and to search the channels
- Add Mode:
- Rage Mode:
Press the Menu or Exit button to return or exit.
Note:
Default scan mode is Add-on Mode.
If there are no new channels since the last scanning. The channels found will
be 0.
Using the "Channel Skip" item
After entering the "General" menu, press
"Channel Skip" item.
Press the Enter button to confirm and pop up the "Channel Skip" menu.
Press or button to choose an item, then press the Enter button to
confirm or cancel your selection.
When you select "", it can skip channels.
Press the Menu or Exit button to return or exit.
Scan missing channels.
Scan with a range of channels.
or button to highlight the
37