Section 3 - Configuration
1. To enable Enable WPA/WPA2 Wireless Security
(enhanced).
2. Next to Cipher Type, select TKIP, AES, or
AUTO(TKIP/AES).
3. Next to PSK / EAP, select EAP.
4. Next to RADIUS Server IP Address enter the IP
address of your RADIUS server.
5. Next to Port, enter the port you are using with your
RADIUS server. 1812 is the default port.
6. Next to Shared Secret, enter the security key.
7. Click Save Settings to save your settings.
D-Link DIR-615 User Manual
26