D-Link DIR-615 User Manual page 28

Section 3 - Configuration
1. To enable Enable WPA/WPA2 Wireless Security
(enhanced).
2. Next to Cipher Type, select TKIP, AES, or
AUTO(TKIP/AES).
3. Next to PSK / EAP, select PSK.
4. Next to Network Key, enter a passphrase. The
key is an alpha-numeric password between 8 and
63 characters long. The password can include
symbols (!?*&_) and spaces. Make sure you enter
this key exactly the same on all other wireless
clients.
5. Click Save Settings to save your settings. If you
are configuring the router with a wireless adapter,
you will lose connectivity until you enable WPA,
WPA2, or WPA/WPA2 (whichever of the three
options you have selected above) on your adapter
and enter the same network key as you did on the
router.
D-Link DIR-615 User Manual 25