Maker - Baumatic GELATO BIC1CH User Instruction Manual

After removing the ice cream maker from its
packaging, check it for damage. If in doubt, DO NOT
use the appliance.
Plastic bags, polystyrene, nails, etc. must not be left
within reach of children as they are potentially
dangerous.
Your ice cream maker contains its own refrigerant
which must be allowed to settle after transport.
Leave your appliance on a horizontal surface for at least 12
hours after purchase or after any move where the machine
might have been stored the wrong way up.
Leave at least 20cm on each side of the machine to allow
free air circulation. Make sure the vent slots are free and
unobstructed.
Please keep all packaging from your ice cream maker. You
will need these in case you should return the appliance for
repair or for any other reason. If the machine is sent back
packaged improperly (i.e., in a box not suitable for
transport), all repairing charges will be incurred by the
sender, even if the machine is under warranty. If the
machine doesn't need to be repaired and the package is not
suitable, the machine will be sent back to the sender, also.
NOTE:
The compressor is fitted with a safety device to prevent any
possible damage to the motor unit. Should you restart the
machine immediately after it has been switched off, the
compressor will not freeze and your appliance will not make
ice cream.
Your Baumatic Gelato BIC1CH
7