Troubleshooting - Baumatic GELATO BIC1CH User Instruction Manual

Professional ice cream maker
Hide thumbs Also See for GELATO BIC1CH:
Table of Contents

Advertisement

Troubleshooting

used only as a guideline to assist in determining any problems.
Problem
The Machine is very slow
in making Ice Cream.
Not enough Ice Cream was
made
The Storage system is not
working
!
The Spatula doesn't work.
The Machine doesn't get
Cold
Your Baumatic Gelato BIC1CH
This troubleshooting section is to be
Suggested Solution
Make sure you have left a space of about
10cm around the machine for the air
circulation.
Make sure the air filters are not being
blocked by anything.
The surrounding temperature could
influence the machine: use the machine
in a dry environment; avoid exposing it to
sunlight.
Too many ingredients were put in. Use
less next time.
Make sure you have added enough water,
salt, or alcoholic liquid in between the two
pots (as explained earlier in this manual).
Too many ingredients were put in. Use
less next time.
The storage function has not been
switched on.
The ingredients contain alcohol which
stops the ice cream from solidifying. Add
alcohol only when the ice cream is ready.
The storage system must be switched off.
Check if the cable has been connected
properly.
If you are using frozen ingredients, you
must wait for them to defrost.
The engine has been switched on
immediately after it had been switched
off:
You must wait at least 10 minutes before
restarting the machine.
Check to see if the cable is working.
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents