High-Voltage Service Disconnects; High-Voltage Battery Packs - Ford 2013 FUSION HYBRID Emergency Response Manual

HIGH-VOLTAGE SERVICE DISCONNECT
NOTE: If possible, release and remove the high-voltage service disconnect.
1
REMOVAL INSTRUCTIONS
1
PULL LEVER HANDLE OUTWARD TO
DISENGAGE INTERLOCK.
2 ROTATE THE LEVER TO HORIZONTAL.
3 REMOVE THE HIGH-VOLTAGE SERVICE
DISCONNECT.
1
REMOVAL INSTRUCTIONS
1
PULL LEVER HANDLE OUTWARD TO
DISENGAGE INTERLOCK.
2
ROTATE THE LEVER TO HORIZONTAL.
3
REMOVE THE HIGH-VOLTAGE SERVICE
DISCONNECT.
HIGH-VOLTAGE BATTERY PACK
WARNING:
ELECTRIC VEHICLES DAMAGED BY A CRASH MAY HAVE COMPROMISED
HIGH-VOLTAGE SAFETY SYSTEMS AND PRESENT A POTENTIAL HIGH-VOLTAGE
ELECTRICAL SHOCK HAZARD. EXERCISE CAUTION AND WEAR APPROPRIATE PERSONAL
PROTECTIVE EQUIPMENT (PPE) SAFETY GEAR, INCLUDING HIGH-VOLTAGE SAFETY
GLOVES AND BOOTS. REMOVE ALL METALLIC JEWELRY, INCLUDING WATCHES AND
RINGS. ISOLATE THE HV SYSTEM AS DIRECTED BY THE FORD EMERGENCY RESPONSE
GUIDE FOR THE VEHICLE. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN
SERIOUS PERSONAL INJURY OR DEATH.
FCS-15129-13
2
2
2
3
3
NOTE:
The Hybrid high-voltage service
disconnect is located behind the rear seat
back on the driver side. Fold the rear seat
back down and remove the cover to access.
NOTE:
The Energi high-voltage service
disconnect is located behind the rear seat
back on the passenger side. Fold the rear seat
back down and remove the cover to access.
10
2013 Fusion MKZ Hybrid Emergency Response Guide