TELEFONICA Wireless Router Installation Manual page 8

5. Connect to the wireless network using the Connect
button.
6. Check to make sure that the wireless network connection
icon for the system tray indicates that the connection has
been correctly established.
8
For further information please refer to the User's manual on the Advanced Settings CD, Section 3.4.
B
. Connection using Ethernet cable
Connect the yellow Ethernet cable (3) to the Ethernet card
on the PC and to one of the router's connectors labelled as
ETHERNET 1X a 4X
3
Switch the PC on. The ETHERNET indicator will light up in
green after a few seconds. This LED will blink when transfe-
ring data.
4 3 2 1
12V DC ON
DSL RESET
ETHERNET 1.0A OFF
3
4 3 2 1
12V DC ON
DSL RESET
ETHERNET 1.0A OFF