Kia Sorento User's Manual & Installation Instructions page 22

Phillips
Screws
Phillips Screwdriver
*Reconnect any connectors, if equipped.
N
*Reinstall the (3) phillips screws securing the steer-
O
ing column shroud (1 underneath and 2 behind the
T
steering wheel). Turn the steering wheel for access.
E
Phillips Screwdriver
*Reconnect any connectors, including the OBDII connector that may have been removed from the lower dash fi nish
N
panel.
O
T
*Reinstall the lower dash fi nish panel by engaging the (5) pressure clips and (2) phillips screws.
E
WARNING! Engine Stall Hazard. To prevent stress on the remote start wire harness , ensure the tilt/
!
telescopic steering column is fully extended, if equipped. Ensure all connections are fully engaged and
locked in place. An engine stall could cause serious physical injury or vehicle damage.
KIA Genuine Accessories (Vehicle Reassembly)
12
Revision Date
3/9/2012
10 mm
Nut
1/4" Drive Rachet, 1/4" Drive 6" Extension,
10 mm Socket
*Reinstall the (5) 10 mm bolts and (1) 10 mm nut se-
N
O curing the steel knee bolster.
T
E
Pressure
Clips
Phillips
Screws
10 mm
Bolts
13
14
Page 22 of 27