Contents Of Hardware Pack; Assembly - Craftsman Weedwacker 316.790130 Operator's Manual

(4) Screws (1/4-20 x 2-1/4)
- for Assist Handle
(actual size)
CARTON CONTENTS
• Trimmer
• Hardware Pack
ASSEMBLY INFORMATION
To ensure safe and proper operation of your unit, all
parts and hardware you assemble must be tightened
securely.
TOOLS REQUIRED FOR ASSEMBLY
• Large Phillips Screwdriver
• Regular Phillips Screwdriver
TO ASSEMBLE AND ADJUST ASSIST
HANDLE
1. Place the assist handle between the top and middle
clamp pieces (Fig. 1).
2. While holding the three pieces together, install the
four (4) screws through the top clamp and into mid-
dle clamp.
NOTE: The holes in the top and middle clamp will line up
only when assembled correctly.
3. Place the clamps and assist handle the over the
shaft housing and onto the bottom clamp.
4. Hold each hex nut in the bottom clamp recess with a
finger. Start screws with a large Phillips screwdriver.
Do not tighten until you make the handle adjustment.
5. Slide the assist handle in or out until the arrow/white
line on the decal touches the clamp assembly
(Fig. 2).

CONTENTS OF HARDWARE PACK

Assist Handle
(4) Hex Jam Nuts -(1/4 x 20)
for Assist Handle
(actual size)

ASSEMBLY

Operator's Manual
15-Inch Curved Shaft/5.5 Amp Electric
WEEDWACKER ® TRIMMER
Model No.
316.790130
• Safety
• Assembly
• Operation
• Maintenance
• Español
WARNING:
Before using this product, Save this manual
read this manual and follow for future reference.
all its Safety Rules and Operating
Instructions.
Sears, Roebuck, and Co., Hoffman Estates, IL 60179 USA
OPERATOR'S MANUAL PART NO. 182XXX Rev. A
PRINTED IN U.S.A. 5/99 (51569)
Operator's Manual
Middle Handle
Clamp
Top Handle
Clamp
6. While holding the unit in the operating position
(Fig. 3), position the assist handle to the location
that provides you the best grip.
7. Tighten the clamp screws evenly, until the assist
handle is secure.
Top Handle
Clamp
Shaft Housing
Decal
– 6 –
Cutting Attachment Shield
(4) Screws (10-24 x 1/2)
- for Cutting Attachment
Shield
(actual size)
Assist Handle
Screws
Fig. 1
Fig. 2
Middle
Handle
Clamp
Bottom
Handle
Clamp
Nuts