SV- 511 System Features
Monitor
•
Uses 10-26 VDC free voltage
•
Two models are available
(Camera, and audio video input jacks)
•
Audio/Video output jacks for recording
•
Speaker
•
Two camera input ports
Camera
•
Powered by 12 VDC from monitor
•
Turns on when monitor is on or ignition circuit is powered up
•
Charge coupled device image sensor with high resolution picture
•
Backlight compensation
•
Wide fi eld of view: Dia: 120
⁰
•
Water resistant housing
•
Operating temperature range: -250C to +500C (-130 F to +1220 F)*
*These are typical ranges, camera will operate outside these parameters.
4
Flowchart B: When monitor screen is black
Monitor screen
is black.
Is monitor power switch
NO
and ignition turned on?
YES
NO
Is green LED on
monitor illuminated?
YES
Check contrast and
brightness knobs for
proper adjustment.
Adjusted
NO
properly?
YES
Check in-line 3-AMP fuse in monitor
power harness (inside overhead shelf ) and
30-AMP ignition mini-fuse at fuse block.
NO
Are both fuses in
good condition?
YES
Replace
monitor.
If monitor screen is black:
•
Make sure power is on and
ignition is on
•
Confi rm that green LED on
monitor is illuminated
•
Check contrast and
brightness knobs for proper
adjustment
•
Check power and ground
connections
•
Check in-line fuse in
Turn on
monitor's power harness
power switch
and/or ignition.
Check power
and ground
connections.
Make proper
adjustments.
Replace
fuse.
9