Any changes or modifi cations in construction of this device which are not expressly approved by the party responsible for the compliance could void This material is confi dential and the property of Safety Vision. It is shared with the user’s authority to operate the equipment.
Page 3
Flowchart B: When monitor screen is black SV- 511 System Features If monitor screen is black: Monitor • Make sure power is on and • Uses 10-26 VDC free voltage ignition is on • Confi rm that green LED on •...
Page 4
Flowchart C: When monitor screen is white Contents SV- 511 System Features ......................4 Monitor Controls ........................5 Monitor screen is white Tools Required for Troubleshooting .................. 7 Operating and Troubleshooting Instructions ..............7 Troubleshooting Flowcharts ....................8 FCC Compliance Statement ....................11 Check contrast and brightness knobs for proper adjustment.
Page 5
S/BY Monitor has power POWER but no picture CAMERA CAM1 CAM2 CONTRAST BRIGHT VOLUME SAFET Y VISION ® Check DIN connector on back of monitor. Is connector 1) POWER LED Check cable connection plugged in at camera. properly? 2) POWER SWITCH Press the power switch (ON) to turn the monitor on.
Page 6
• Tone generator holding the clip down. • Terminal tool kit (such as Snap-On Tt600 if swapping Clarion components for Safety Vision) Monitor’s Power connector pin description Pin No. Description Value Tool Red: positive power...